Wednesday, April 29, 2009

Computer Virus Repair Help

Viruses happen. They've been around for years and unfortunately that doesn't look like changing. What happens when you need to do a computer virus repair?

Of course, you should be running up to date anti virus software at all times.

But occasionally a virus will still slip through - an update fails, the anti virus software company launch a new version that causes your current one to stop getting updates or you've just plain ignored the "you need to update" messages.

So what do you need to do when you need to perform a virus repair on your computer?

If you're not already running an up to date virus removal program, install one now. Most of the programs around can cure most viruses for you when they detect that you've got a problem. If you've got a boot sector virus you may not be so lucky, but otherwise there's a good chance that they can help.

Unplug your network and internet cables. Disconnect from your home wireless network before you cause any damage there.

Then run the anti virus program, following any virus disinfection prompts as they appear.

Once that's been done, reconnect your internet connection and if necessary update your anti virus software with the latest virus signatures and then re-run the software.

With luck, you've now repaired any virus infection you may have had.

Next, make sure you keep it that way.

Get Windows Security Center to advise you when there problems with your virus repair software. If you're running XP or Vista, you'll find the Security Center in your Control Panel (or just search Help and it will point you in the right direction).

Check your virus repair software settings. Make sure that the virus signatures are regularly updated so that you keep any potential future infection safely out of harms way.

Get a free virus diagnosis tool to check whether your computer is at risk from viruses.

Damaged Ceiling Paint

Quality Stair Parts Make Quality Staircase

Prioritization is an important skill not only at work but also in life. This is actually a principle which is applicable in many things. The same principle holds true when it comes to home improvement. Prioritization means being able to put first things first - thus, identifying those which are important to those which are not. It is important to note that there are different parts of our homes which need to be maintained and taken care of. Others may be big and some small, nonetheless, we would like to recognize and give equal importance to them.

A staircase is considered as an important part of the house - at least for people who have two or more floors in their homes. If you'd like to work on some improvement to this critical part of the house, then you'd like to focus on the stair parts that you are or will be using for starters.

Stair parts come in different materials and design. The overall look of your staircase would be dependent on your selection of these parts. First thing first is for you to become aware of the array of selection for your stair parts. It is best that you have a good background on them as this will serve as your foundation when you start working on selecting which parts to use and how they blend together. As you consider design, you might also want to make sure that you are looking after quality as well. Remember that: quality stair parts make a quality staircase. Design and Quality are two important factors to bear in mind.

Nailing down the design that you want will ultimately be based on the overall design of your house. You'd like to make sure that it fits well in the theme that you are observing or would want to achieve in your home. Having this information will make it easier for you to identify which stair parts to choose. This will also allow you to pay attention to the details and the intricacies included.

Bottom-line is: the quality and design of the stair parts you choose will narrow down to your own preference, requirements and specification. You would like to gather as much information as you can or creatively see how parts fit together and to your home design. After all, it would be hard to be constantly changing the design of your staircase. More than this process being tedious, it may turn out expensive and impractical for you to sustain as well. This is why it is important to get details first and then make informed choices. Ensuring that you do these things will ultimately lead to successful improvement your staircase.

Learn more about stair parts, feel free to visit http://www.elegantstairsandwoodfloors.com/
Eliza Maledevic Ayson writes for Jump2top.com - SEO Company

Wood Floor Discoloring

Tuesday, April 28, 2009

How to Choose the Best Kitchen Window Treatments

You know how parties often go - everyone ends up in the kitchen. This is certainly true at my house. I am not sure why that is. Maybe it is because the hosts are often still cooking or preparing food and so the guests naturally want to hang out where the people are. Or, maybe it has something to do with the whole "hearth & home" aspect of our past, and centuries of life where staying warm was paramount and eating was more about survival than pleasure. Whichever it is, the kitchen is usually a place of congregation and comfort and therefore a natural focal point in most homes.

This is probably why the kitchen is one of the most common home remodeling projects. And, the right window treatments can add that finishing touch that can really make a room beautiful. Realtors and home appraisers know this and when they are assessing your home's value they look at the kitchen and bathrooms first because those are the rooms that can add real monetary value and influence a purchasing decision.

So, which window treatments are best for kitchens? One of the main factors that must be addressed is the environmental conditions that often exist, namely heat and humidity; and let's face it, sometimes even smoke. Because of these conditions, it is wise to purchase durable blinds and shades made from synthetic materials. For example, faux wood blinds and shutters. These also come in vinyl and composite.

If you are interested in preserving the view from your kitchen windows you may want to look into solar shades, which are a type of roller shade. Solar shades come in varying levels of opacity depending on how much light you want to let in. They are also made from synthetic materials and come in a wide variety of colors to match any dcor. These types of shades look great and reduce the amount of solar heat gain as well as UV damage to your furniture or other home accessories. Similar to solar screens are roller shades. They too offer different levels of light filtering but also come in solid fabrics that offer greater room darkening, even blackout.

Next up are cellular shades and pleated shades. Both have a similar look, with folded pleats, but pleated shades don't offer the insulation of cell shades. Both are attractive, fairly durable and come in a wide variety of colors and textures. These types of shades offer a classic look and are a great way to inject some color into your kitchen's dcor. If you are interested in greater insulation, cell shades are one of the best and they come in single cell, double cell and triple cell with the latter offering the most. Additionally, these shades can be ordered with the top down/bottom up option which is a great way to let in light while still preserving privacy.

There are other choices such as mini blinds, roman shades and woven woods. But, in my opinion the latter two options are not ideal because they are, more often than not, made with fabrics that are a little less easy to clean which over time can be a pain. Mini blinds will work fine but again, cleaning each individual little slat is a cumbersome process. If you have ever had to clean mini blinds you'll know what I mean. I would recommend to stay away from wood blinds and shutters in the kitchen as they are not quite durable enough for the kitchen environment.

There you have it a mini guide to kitchen window treatments. My personal favorites are solar screens, vinyl plantation shutters and faux wood blinds; they are some of the best choices for your kitchen. - David Brooks

Monday, April 27, 2009

Searching For Your Dream Home

First things first when looking for your dream home. Make a list of all the things you're looking for. With today's computers and search engines on the Internet it makes home shopping by keywords very simple.

Most real estate websites have boxes you can check off, if you're looking for a three-bedroom house with two bathrooms and a swimming pool. You simply check these items off, select the area you would like to search for homes and and you now have a list of homes to look at.

Some of these homes have virtual tours on the Internet, which allows you to go through most of the home before you actually visit the house. Modern technology has made searching for your dream home a virtual reality.

You can now look through the list and select the most appealing homes before you start driving around. Don't let the pictures of these homes deceive you on the Internet or MLS. Some of the descriptions of these homes can also be very deceptive.

When looking for your dream home, used every possible means available to you. This would include your real estate professionals, newspapers, magazines, search engines, internet websites, and don't forget about driving around your favorite neighborhoods. This is actually how we found one of the homes we bought.

Our real estate salesman gave us a list of homes to look at, while we were driving around, we spotted a home that caught our attention and we pulled in the driveway. To our amazement, the real estate saleswoman who listed the home lived a couple of houses down the street and was right there asking if we wanted to see the inside of the house.

Your family, friends, neighbors and people you work with, can also help you with your homebuying quest. You would be surprised at how helpful some of these people can be. I knew someone who found a home they really liked, knocked on the door and told the homeowners, they would be very interested if their home was ever put on the market. Within a few weeks, he was buying the home.

I'm not telling you to knock on everyone's door whose not selling their house, but you never know how or when you're going to run into the house of your dreams.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a home buying checklist to take some of the frustration out of home shopping

Don't buy a house without visiting, one of the best websites for home inspections. This website has thousands of pictures that deal with home inspection problems. If you're buying a house, check out this section on home inspection cover ups

Sunday, April 26, 2009

Home Improvement Consumer Laws Can Help You in Many Ways

There are several home improvement consumer laws that have been created to help the consumer who are working with contractors for their home projects. These consumer laws are different in different regions but one must be aware of all of them to take maximum advantage as well as to avoid any kind of troubles. Here are some of the most important home improvement consumer laws that can help you in your daily life.

You Have a Right to Cancel Your Contract

The federal government gives you the rights to cancel any kind of contract you signed within three days. This law has been created to support a consumer who happens to change his mind after signing a contract. So, in case you change your mind after signing a contract, you have three days to cancel the deal without any troubles. You have the right to do so.

Don't Forget the Cancellation Form

When you cancel a contract, make sure you get two cancellation form of the contract from your contractor. One of these forms is for your record while the other one is for the contractor. You have to clearly mention all the details of the contractor, and the reason for canceling the contract. Make sure you ask for it from your contractor after canceling a deal. Majority of people are not aware of such home improvement consumer laws and they do not ask for any kind of documentation when they cancel a deal.

It is Your Right to Ask for a Contractor's License

Many states do not allow any contractors to work without a contractor's license. If you do not know about home improvement consumer laws of your region, you should make sure that your contractor is registered and has a valid license to work in a particular region. Otherwise, you might have to face several problems if your contractor does not have a contractor's license.

Avoid a Bad Contractor

Make sure that the contractor you hired for your project has a good working reputation. Otherwise, if there is any kind of complaints signed against your contractor, you will not be able to proceed with your home improvement project according to home improvement consumer laws.

These laws are different in different regions but you can always research on the internet and get yourself updated to use these home improvement consumer laws for your best.

For detailed articles on home improvements projects and contractors, visit http://www.theyarelocal.com/articles/index.php.

Room Additions

Benefits of New Zealand Foreign Trust

Many people look for a decent low-tax jurisdiction to incorporate their offshore business. Most tax havens already acquired negative connotations and are not suitable in certain circumstances. New Zealand is a fresh choice.

New Zealand is a first world country, a member of OECD, which never was a part to any blacklists of harmful tax havens. It offers absolutely respectable international image and serious tax privileges at the same time.

The structure of interest is normally a New Zealand Foreign Trust, also referred to as New Zealand Offshore Trust.

The concept of foreign trust was introduced in 1988. It does not require to be officially registered for its recognition in New Zealand and worldwide, particularly in the countries with English law and those who joined the Hague Convention on the Recognition of Trusts or have double tax treaties with New Zealand.

NZ Foreign Trust with non-resident Settlors and a local NZ Trustee is considered a tax resident of New Zealand but tax exempted with all its offshore income.

What happens in practice in most cases, you incorporate your own New Zealand company with local NZ directors, then settle a Trust with this company being a Trustee. NZ Trustee company can conduct any international activities in its name but in favor of the beneficiaries, free of tax. An interesting fact is that this advantage is based not on a loophole in the law but instead on a specific, and very prudent in our understanding, interpretation of taxation basics by New Zealand tax authorities. The offshore income from such activities is not subject to tax in New Zealand, because it is not legally attributable to NZ company.

NZ Foreign Trust construction is good for nearly any business, be it trading or other commercial activities, savings and investments, holding of title to any property. As any other trust structure, it is an instrument for wealth management and protection.

It can be used as an independent business tool - as soon as the source of income is outside New Zealand it is tax exempt. You are only to make sure you are not subject to tax at the source of income.

The other remarkable feature is possibility to apply for double tax treaty protection. New Zealand has agreements with 35 countries. Each of them, of course, requires lawyer's interpretation, but as soon as you qualify for DTT protection, you may count on reduced withholding tax rates on dividends, interests and royalties. And the same income is not subject to any further taxation in New Zealand following its offshore nature.

One more thing is that comparing to other jurisdictions with similar benefits, NZ Foreign Trust is quite affordable in setup and ongoing maintenance.

To see more particular examples and benefits of new zealand foreign trust, please read our blog Offshore Advisor dedicated to offshore services and taxation.

Missing Window Flashing

A Mortgage Guy's Take on Adding Value to Your Home

There is no doubt most of us have changed our attitudes and habits toward real estate. We all had our plans based upon the former real estate economy.

Now that it is history we have to change up a bit. Many of us, who thought our current home was a stepping stone, will likely be in this home for longer than we anticipated. And some of us will decide to drop some money into this home to make it more livable and hopefully add to its value.

So, who determines value? The market does. I was a realtor for a few years and I can tell you what people really desire and what appraisers view as the best possible upgrades to add value to the home.

Now, if you are really going to go all out there is nothing that adds value like additional square footage. However, if you live in an area where the cost to build extra room on to the home is greater than the actual value extra square feet don't do it.

And if you do add on make sure it is an addition that greatly enhances the aesthetic feel of the home. This way you get a double whammy. You get the additional square footage and a property more saleable than the next.

The next place to put your money is in the kitchen. Use materials that are in fashion, and don't go overboard. Believe me the next person that buys your home will not know you bought your cabinets at Home Depot.

An added tip regarding the kitchen.. If it is a bit confined make sure you open it up to a living area. In the modern era of home building architects design homes with open kitchens. Pre-1990's homes did not. If you can logistically and cheaply do so, it will be well worth it.

Of course, if you can upgrade the bathrooms do so. Most home buying decisions are made by women which is why the kitchen and bathrooms are so important.

Flooring is equally important. Wood floors will always be in. Tile varies from year to
year. Laminates come and go. But you can find wood floors from the thirties that can be refinished and be absolutely beautiful.

And right before you sell, make sure you paint with earthy tones. This is the cheapest most effective upgrade you can make.

Until you sell again, I bid you farewell...

If you have or wish to own a home anywhere near Austin and want the low down on home mortgage and refinance click here . Additionally, get a fantastic analysis to help Austin residents determine if they should refinance their mortgage .

Structural Drawing

Saturday, April 25, 2009

How to Find a Good Railing System for Your Home

Instead of going out on weekends, it would be extra fun for you and your family to just stay at the backyard and enjoy extreme fun. This way, you can spend a considerable amount of quality time with your loved ones without having to break your bank account. The sun, good barbeque, and relaxation are the only things you need to enjoy your weekend. As you are having a good time with your family, security and safety of your loved ones should also be taken into consideration. They should be securely enclosed in stylish deck railings.

Most of the households today are already equipped with highly effective and at the same time stylish railing systems in order to provide security and style all year round. Since weather these days are already unpredictable, you need to consider a railing that do not easily succumb to corrosion and could preserve its beauty in the years to come.

How To Choose an Excellent Railing System

The proliferation of many railing manufacturers has made the hunt of many homeowners of excellent railings a lot more difficult. With the vast choices offered to them, choosing can be really confusing. Manufacturers may be advertising that they have the best railing systems around but a wise consumer is not easily fooled by advertisements. So, if you are on the quest for a good or even excellent railing system, read on as you discover some of the railing system factors you need to consider.

The very first factor that you should take into consideration is the strength of the railing. Of course, you don't want to be bothered by substandard railings that could easily cause injuries to your loved ones. Aside from the quality of the product, aesthetics is also a priority. A railing would prove to be futile if it does not have a good appeal to people. And lastly, budget is also a big factor. You can still find an affordable railing system without spending too much cash.

Modernize your Home with Metal Deck Railing

Who would actually want a home that looks from the medieval era? Definitely, not you. So if you want to have a good looking home and a backyard, then you have to invest on the aluminum deck railing system. This boasts of a modern finish yet does the compromise the structural strength you are looking for.

This deck railing is also child-friendly as it has no sharp objects which could cause injuries to children and even to adults. And most importantly, installing the aluminum deck railing is as easy as one-two-three. In just a span of hours or even minutes, you can now enjoy a stylish and sturdy railing in your backyard.

Some Friendly Advice

So, if you are already decided to install the aluminum deck railing to your home, there are still some important things you need to know. While strength is important in any railing, aesthetic appeal should never be compromised. In the market, you can find different stylish railings that would provide greater beauty to your home. Also, exterior finish is another important consideration to note. You can find railings that are electro statically charged to ensure uniform adhesion paint.

These are just some of the factors to be considered. However, it is still the homeowner on who could decide on the style of the railing. After all, the maxim "to each his own" still proves true.

Adam Peters is an online entrepreneur and writes for many consumer magazines. Find at http://www.deck-porch-railings.com/aluminum-deck-railing.html more articles on aluminum deck railings

Installing Sill Plates

Friday, April 24, 2009

Specific Usage of Marble and Granite For House Interiors

Marble, granite and other stones are selectively engineered for their specific usage in the interiors of a house. These stones are used in different segments of a house, depending upon their cost, strength, durability and other properties. Before selecting a particular stone for a specific use, many factors are taken into account. Its feasibility of usage, cost-effectiveness, strength and composition are some of the important factors which are considered at the time of stone selection. Marble and granite are two of the most important natural stones, which are being used since ages, for the construction of house interiors. These valuable natural stones are far more superior to synthetic man-made stones.

Marble is a beautiful and versatile natural stone, which can be used almost anywhere inside a house. Marbles are mainly used for the flooring of a house. Floors made of marbles are highly durable and display a unique look of elegance. Fire resistance property of marble makes it an absolutely suitable material for making fire places. It is not combustible therefore it can be used in all such places, where there is a great chance of fire ignition. Marble is highly suitable for bathroom flooring, as it is less slippery. It is also used for making wash basins, countertops and other bathroom furniture. Marble is also used to make shower-walls. Elegant vanity sets can be made out of marble stone. Marble can also be engineered to design beautiful and durable furniture items.

Granite is a highly durable igneous rock stone, which has wide variety of usage inside a house. It is mainly used for kitchen countertops, bar-tops, shelves, showcases and dining tables. Granite is everlasting stone which does not react with normal house hold usage items. It is virtually impossible to scratch granite stone, therefore it is mainly used for making countertops; especially kitchen countertops. Beautiful countertops for various other purposes can also be carved out of granite stone. Vivid variety of slab and tiles can be made out of granite, for designing floor and ceiling.

Together, marble and granite form such a blend of natural stones, which can give a uniquely defined look to any house. Their specific usage in different portions of a house, gives the desired beauty and durability to that house. These are long lasting natural stones which are far more superior to other man-made materials. Marble and granite accentuates the true interior beauty of a house.

Pacific Bedrock Marble Inc - Expert manufacturer of granite, marble, and other stone product, dealing in Kitchens counter tops and wet bars, bathrooms, fireplaces and all stone needs, specialized in manufacturing and supply of finished stone products. For more information please visit: - http://www.pacificbedrock.com/

Wednesday, April 22, 2009

A Good Time For Remodeling Your Home

When you say you want to start remodeling your home sometime soon, that is a rather broad way of describing what you want done. You have to be more specific about your remodeling plans so that the contractor knows exactly what you want to achieve in this home makeover project.

The sub-project of bathroom remodeling includes new vanity, new sink, new faucet, new bath tub, new shower walls, new shower doors, new vinyl flooring at the very least, that is. You may also need to have a new toilet, new water closet, new mirror, and new medicine cabinet integrated into your bathroom layout as well. Whew! And thats just the bathroom for starters.

In kitchen remodeling, you may need new countertops (like granite countertops which stand up very well under wear and tear due to its sturdiness) or perhaps new kitchen cabinets. A new kitchen sink may also be warranted if your old one has stains that wont come out even with the toughest detergents and regular scrubbing on your behalf, or if it has rusty parts that may prove dangerous if young hands get too close.

Acoustic ceiling removal may prove necessary before you have recessed lighting installed in your living room and dining room. Recessed lighting is great for showcasing the interior details of your house, including the new carpeting you may have had installed. New dual paned windows or retrofit windows might look good here as well.

Regardless of how you want to conduct remodeling of your home, you will probably need the professional services of an experienced and knowledgeable contractor (unless you have extensive experience in home makeovers yourself and want to make the home remodeling a DIY project instead.)

The rule of thumb when hiring any contractor is: make sure everything you ask the contractor to do for you is stipulated in a written agreement that both parties have signed. This also protects the contractor so that he gets paid for everything that he does for you .

When you ask the contractor to purchase the materials for the home makeover, you should list down what sizes, colors, models and/or brands should be bought. This cuts down on any misunderstandings and assures you that you get what you asked for.

The labor aspect is another sticking point. You should come to a definite agreement with the contractor as to how many people he should have in his team, how long they should work on the project, and what happens if the team doesnt finish the project on schedule (meaning, do you wind up paying for the additional days or not?)

A good contractor will provide a warranty for the work that he and his team finished for you. This way, if evidence of shoddy work shows up later on, you can hold him to the warranty and get the mistakes redone (without you having to pay extra money to him.)

By the way, who will handle disposal of trash and any debris that is produced by the home makeover project? There are contractors who include that in the service though there may be projects where you have to find a hauler who will cart away your debris and trash for you instead. Clarify this beforehand as well.

It is also helpful if there is a stipulation in your contract permitting you a grace period before the project starts so that if you change your mind, you can always bow out gracefully without spending a cent or incurring the ire of the contractor.

Extreme Makeover Pros is your affordable contractor serving Orange County, Ca. for nearly 25 years. Specializing in Home Improvement and Renovation. For more details visit http://www.extrememakeoverpros.com

Fixing Up Your Home And How To Finance It

Undertaking a home improvement project can be really expensive and thus, financing is essential. There are many financial products that can help you finance home improvements. Some are more suitable for the task than others but all of them have advantages and disadvantages.

When home improvements are necessary, the following financial solutions can provide you with the needed funds for the project depending on the amount you want: Credit cards, unsecured personal loans, mortgage loans and home equity loans. All of them (except for the credit cards) can be called home improvement loans because what defines a home improvement loan is the use that you give to the money. However, home improvement loans are usually either mortgage loans or home equity loans.

Credit Cards For Financing Home Improvements

Credit cards are undoubtedly great financial tools due to their flexibility. However, they are not particularly useful in terms of scrimping and saving. The interest rates charged by credit card issuers are significantly higher than the rates charged by lenders and thus, a $3000 home improvement project can end up costing $600 more per year. However, used in combination with other financial products like home equity loans, credit cards can provide the funds necessary for covering unexpected expenses in the project or additional improvements that may rise while the original project is on course.

Unsecured Personal Loans For Home Improvements

Unsecured personal loans are perfect for home improvements but can provide the funds for small projects only. If your home improvement plans will not be that costly, then an unsecured personal loan for home improvements may be the solution. Besides, personal loans have an advantage over secured loans: there is little to no paperwork and they are processed considerably faster due to the lack of collateral.

Mortgage Loans For Home Improvements

If your property is not securing any debt, then, you can request a home improvement mortgage loan. These loans come with the lowest rates on the market. Since you already own the property, however, the interest rate will not be as low as home loans for first time home buyers which feature subsidized rates. But the interest rate will still be significantly lower than that of any other financial product.

Home Improvement Loans Based On Equity

Last, but not means least, home equity loans are the most common form of home improvement loans. These loans are based on the equity left on your property. Thus, it does not matter if you have a mortgage balance on your property, you can still get finance for your home improvements as long as the value of the property is higher than the amount of money you owe that is secured by it.

The amount of money you can obtain will depend on your available equity. However, for home improvements, there are loan options offering up to 125% financing if you have a good credit score and history. Thus, even if you have only $10,000 left on a $100,000 property, you will be able to obtain up to $35,000 on a home improvement loan based on equity.

---

Jessica Peterson writes finance articles for Yourloanservices.com where she shares her knowledge about how to get money for a starting-up business, consolidating any kind of debt, repairing a home even with a bad credit history and more.

Tuesday, April 21, 2009

Wood Beams House Repair Tips

If you live in a moist climate in the winter and a dry climate in the summer and you have exterior wood beams exposed to these elements. You could develop wood beam problems over time. If wood beams are properly maintained and painted often they could last for a long time. Wood beams can last many years if properly taken care of.

Exterior wood beams that are used to hold up roofs, patios and decking can suffer from wood rot if not taken care of. Let's take for example a wooden beam located in a patio holding up a section of a large roof. The span of the roof being is only 10 feet long. As we look at the exterior wood beam. We noticed the upper corner of the beam is soft and rotted.

The beam damage is roughly the size of a baseball. The wood beam itself is a 6 x 10. Do we need to replace this beam even though the damage is not real big. The answer to this question is yes, any amount of damage to a wood beam takes away from its structural strength.

If you have a wood beam holding up the roof and the beam fails you could end up replacing a large section of your roof as well as the damaged beam. Replacing the damaged beam is usually a difficult task. The beam is usually sandwiched between two walls and will have siding or stucco around it.

If you're lucky enough to have the wood beam sitting in a saddle or on top of a wood post this will make your job easier and will require less skill. If however the beam is located between two walls this will require shoring up the roof and removing the beam.

Beam replacement should be left to professionals. This is not often as easy as it looks and could create a safety hazard if not done properly. I have seen beams replaced by homeowners or handyman and the damage that was done after the repairs, was worse than just leaving the beam alone in the first place.

The biggest problem with exterior wood beams is that they are usually holding up large amounts of weight. If the beam is removed without the proper bracing and shoring of the roof or floor area you could have a larger problem than you started with.

Exterior beams over time seemed to develop large cracks or splits in dry weather. These large cracks and splits weaken the structural strength of the beam adding more stress to the beam itself leading to structural failure eventually.

Extreme climates where temperatures very over 40 in one day seem to suffer the most damage to exterior wood beams that are not properly maintained. Beam maintenance will require painting and keeping moisture away from them.

Be aware of structural beams in or around your house. A little painting now and then can save you thousands of dollars over the life time of your house.

Greg Vanden Berge has been in the home building and remodeling business for over 30 years. With this knowledge he has created a few websites that provide useful information for home owners as well as contractors. His main goal is to educate professionals in the home related businesses, dealing with problems that can easily be avoided with just a little bit of information

His website http://gregvan.com provides all kinds of answers to remodeling and new house building issues that could create major damage as well as possible damage to your pocket book

Visit us now for Vista Home Improvement

Home Siding Books

Sunday, April 19, 2009

How to Seal a Concrete Driveway - House Help

Sealing a concrete driveway is a simple, inexpensive and fast way to maintain the value of a home. Your concrete driveway is one of the first things people see when they drive up to your home. That is why it is a good idea to keep the concrete driveway looking as good as the day it was installed. Sealing the concrete driveway with a penetrating siloxane concrete sealer will give years of protection to the driveway. Another name for them is siloxane water repellent.

How Concrete Driveways Deteriorate

Water that penetrates and expands from freezing does most of the damage to concrete driveways. That is because the water expands 9% in volume when it freezes. This expansion can physically break the concrete bonds and cause it to flake, pit, spall and crack. Sealing the concrete reduces the amount of water absorption.

De-icing salts do damage to the concrete also. The salts attack the surface layer of concrete and the steel reinforcement inside the concrete. When de-icing salts are applied, the melted water can enter the concrete and then refreeze as the temperature drops.

Sealing the concrete with a penetrating siloxane sealer, also called a siloxane water repellent will reduce water and salt uptake and the number of freeze-thaw cycles the concrete goes through.

Penetrating Concrete Sealers

Concrete driveways are high traffic areas, with cars entering and leaving and kids using them for basketball courts. That is why your concrete driveway needs to have a penetrating sealer as opposed to a surface sealer.

A surface sealer is just that, it is applied to the surface and does not penetrate. The surface sealer will wear away rapidly from use. Every time a car pulls in or someone bounces a ball on it, a little bit of the sealer is removed. Some surface sealers can make the driveway slick and dangerous when it rains because the rough texture is covered up.

On the other hand, a siloxane sealer penetrates below the concrete surface. Siloxane sealers form a hydrophobic barrier against water and de-icing salt attack. They are commonly called siloxane water repellents. Because they are below the surface, they are protected from wear on the surface of the concrete. The natural texture of the concrete is maintained so traction and safety are not a concern. Finally, because the concrete sealer is below the surface, there is no shininess or gloss to the concrete.

Step 1. Let the Concrete Cure

Freshly poured concrete cannot be sealed. It must cure for 21-30 days prior to application of a penetrating sealer.

Step 2. Clean the Driveway

Broom off any loose debris such as dirt, mud and leaves off of the driveway. If there are any oil or grease stains, these should be removed to the best of your ability with a pressure washer.

Step 3. Allow the Concrete to Dry

Water-based siloxane sealers need to have the concrete dry for 24 hours prior to application. No rain should fall within this 24 hour time period. This will reduce the dilution of the siloxane sealer and ensure that the maximum amount gets into the concrete substrate itself.

Step 4. Spray, Roll or Brush on the Sealer

It doesn't really matter which method of application is used, but of course a roller is faster than a brush and a pump up garden sprayer is faster than a roller. No other special equipment is needed. You do not need to worry about getting it onto plants or grass. If any gets onto metal or windows, wash it off immediately with soapy water and a sponge.

Apply only enough concrete sealer that a slight whitish color is seen. Any ponding of material should be spread evenly prior to drying.

Step 5. Keep Rain and Traffic off of it for 24 hours

The sealer will dry in 1-4 hours but it is a good idea to keep cars and traffic off of the driveway for 24 hours. Application should occur when rain is not in the forecast for 24 hours after application to give the sealer plenty of time to penetrate and seal.

Once cured the siloxane sealer becomes a bonded component of the concrete driveway. A properly sealed concrete driveway will give years of protection from damage. The return on investment will be worth the time and expense of application.

This article is written by Aaron Kuertz who's with Applied Technologies. Aaron has been in the waterproofing industry since 1998. Applied Technologies is a manufacturer and supplier to professional waterproofing contractors and homeowners in the United States.

For more information about concrete siloxane water repellents, visit Applied Technologies.

Saturday, April 18, 2009

Waterproofing Contractors All Look the Same - Carlsbad Construction

If you're standing in the middle of a pile of papers, brochures and handouts, inspection sheets and business cards, you're not alone. Many people feel not only overwhelmed by the sheer number of people doing basement waterproofing all over America, but are overwhelmed by the details that go into a job like this. People get strung out on quality vs. price, marketing and internet related posts.

The question boils down to: How Do I Pick a Basement Waterproofing Company to fix my Wet Basement Problem?

1.) Do they outsource their work?
In other words, is what they're saying they're going to do something they're actually going to do themselves, or do they hand it to someone else? Outsourcing is a great way for companies to cheaply hire other workers to work on a job by job basis. This allows them to get massive amounts of work done quickly. Quickly isn't always the "best."

This can lead to other problems down the road. Such as holding the company liable for any issues you're having with the install, insurance, or payments.

If a company supports its own crews it's much easier to cover the workers, receive payments directly and swiftly deal with any issues the customer might have. Direct communication with a support staff typically leads to a higher customer satisfaction rate because of boss-employee relations. A crew you hire out randomly doesn't have to call you back or be accountable for anything. A crew that works for the company has their jobs and the company's reputation on the line. Quality of service and install are then typically better.

2.) Price.

Price is a huge factor for many people.

If a company immediately says that they can knock a few thousand dollars off for "X,Y,Z" that's a huge red flag. They wouldn't have been able to take off that amount of money if it wasn't "fluff" or mark-up.

The trick is applying this to the overall scheme of things. If a company comes to $2,000 for a 120 foot job, then that's a red flag: What kind of material are they using? Are they using cheep outsourced labor? Is what they're giving me something I could find at Home Depot? For the other end of the spectrum, if the company is $16,000 for that same 120 foot job: What am I getting for this? Is it worth it to me? Can I modify, upgrade the system and finish after? If you notice that the company then knocks off that "fluff" factor, then that should also be a red flag: How much is mark up? Is the product really good quality if they could come down in price that fast?

If there are no red flags ask about second options to get you moving in the same direction. Any company that's not willing to work with you around your budget isn't worth doing business with in the first place.

Jacob Lee- pioneer basement http://www.pioneerbasement.com

Stair Closet Wall Framing

Parts to Repair Your Electric Kilns

Many people do not have a great deal of skill when it comes to repair work. The United States has become a "throw away" society. The meaning is simple; it is cheaper to throw a DVD player away then to have a broken one repaired. There are some special people out there, though. Some of them work in their own art and pottery studios. They know how to repair the tools necessary for their trade. These special people realize they can live an artist's lifestyle of little money because they have the ability to repair the many items in their shop or studio.

A necessary tool in a pottery studio is a kiln. There are a few unique individuals who have kilns that are heated by burning wood. Most artist depend on electric kilns. Either way a wood burning kiln or electric kiln will need to have brick. The kiln brick holds and radiates the heat of a kiln around the ceramic pieces inside. Artists who are able to identify damaged bricks should be able to replace them with little difficulty.

Replacing a controller on a kiln is a little more difficult. The kiln controllers manufactured today are high tech pieces of equipment. They are made to fit and work on a kiln so the kiln is able to reach and hold exact temperatures. These controllers are computerized devices; thus, replacing a controller needs to be done with care. The artist who replaces his or her kiln's controller should have some electronic and computer skill.

The electronic skill that is useful when replacing a controlling unit of a kiln can also be helpful when elements are replaced. The kiln elements directly power the kiln. Because these are electric pieces of the kiln, and artist who works on his or her own kiln should have some someone who has experience with electric heating elements looking over his or her work after the work is completed.

The American Art Clay Company has many experienced employees. They have been working with artists and schools for over eighty-seven years. For the artist looking to do repairs and replacing parts on his or her electric kilns AMACO is the place to contact. The kiln controllers they sell are the controllers a good artist needs. AMACO knows to offer their customers controllers that will accurately fire a kiln each time. Kiln elements must be fit into a kiln with precision. AMACO is an Indiana based corporation that is the right place to look for the do-it-yourself person who is also an artist.

Friday, April 17, 2009

California Seasonal Maintenance

Buying a home is a good investment opportunity and in the years to come you can see the value of your home rise. Many people buy a home with the intention to sell it in a couple of years for a profit. However, some people who put their property out for sale complain that they are not getting the price that's suitable to their property. Why does this happen? Reason buyers are complaining is the bad housing conditions and this makes them want to lower the price.

Such situations won't happen to your home if you have taken steps to maintain it all through the year. Every season entails its own home maintenance requirements and as a California homeowner you need to keep tabs on such things, to have a home that's in top condition, at all time. Here is a look at some useful seasonal home maintenance tips:

Fall and Winter

Clean all your windows and use weather-strips to seal air leaks as this will enable you to make less use of your heater and furnace

Check the motor between bricks of your fences and chimney.

Clean up your gutter and down spouts. Use a gutter filter to prevent debris from falling into it.

Check all your GFCI outlets. These outlets must be present in all wet areas such as kitchens and bathrooms as they help to protect against shocks.

Make sure that all your home electrical appliances are working properly as you will need heating devices to function as winter time proceeds.

Spring and Summer

Check your home's exterior paint and foundation for any cracks and signs of deterioration.

Look around your house. Do you notice water settling around the house rather than draining away? If so, fill up the soil area in such a way that it slopes away from the home.

Check the homes attic and crawlspaces for water leaks, mildew, fungus growth and pest. Clean these areas thoroughly.

Check out on all concrete areas of your home for cracking. If you notice any, fill them up with a concrete-patch to prevent any further deterioration.

Paul is a principal of NewHomesSection.com. Search Northern California builders, California condos and active adult California today!

Saturday, April 4, 2009

Pleasing, Perfect Patios

Scope
A good starting point will be to undertake a site assessment and analysis of the client needs and user requirements. The adage 'don't fire a canon to kill a fly', comes to mind, therefore from the outset it is important to determine the scope, i.e., how will the area(s) be used, by whom, how many users and when do these needs arise. Scope can also influence patio layout/profile and indeed levels, and these aspects are important factors to be considered in developing a creative but distinctive patio layout.

Position
Some of the previous questions might be obvious, but how many times have we seen patios which are too small or worse are poorly positioned for the event? Too sunny or more likely too shaded and cold when being used? Put simply if the main activity and time of day is around 'lunch events' then it would be obvious that the patio position should reflect this need. It is important to note site characteristics, all level might be fine for many people but some might be challenged by variable levels. The latter can also be exploited in the design and layout. Site orientation including the direction of sun travel should be noted as well as the positions of the sunny but also the shaded areas and the relevant times. Again this will be important for planning the various patio areas for breakfast, lunch and evening/dinner activities. Frequently space availability (or lack of) and site orientation do frequently impinge on patio positioning options. Typically patios are used more in evenings and are therefore positioned away from the house so as to catch the evening sun. In order cases, some very fortunate users may have separate patios and thus optimum positioning options for sun and/or shade.

Size
An area to sit, read and eat will have different space needs. Small sites do limit options, access routes can also influence size. Too small and the area will appear cramp, unappealing and probably unusable. Too large and perhaps 'car park look' comes to mind. Getting the balance right will be influenced by a number of factors scope, space availability etc. As a general guide, we would recommend that the minimum airspace/footprint should be 3.0 metre/10 feet, but with space availability permitting a better layout would be in the range 4.5m-5.0m/15-16 feet. This area allows for adults to sit comfortably at tables or later stretch the legs without fear of running out of space. In smaller sites, which may necessitate the use of compact but round tables, typically minimum diameters would be 3.0m/10feet, but these are small spaces for 4-6 adults.

Therefore for groups comprising 4-6 adults, the practical size requirements for the main patio area would be approx 4.5m x 5.0m or 15ft x 16ft. Clearly reading areas or informal /alfresco areas will require much less space. Access routes should be a minimum of 1.2m-1.5m /4-5 feet wide. There is little point building pedestrian routes/pathways 3.0m/10feet wide? Better to reduce the paved space and space gained utilise for additional planting/lawn/features?

Transition
One frequently (very popular with designers/architects) comes across the expression 'seamless transition'. What does this expression mean? Essentially this refers to the physical extension of the interior area to the exterior space, in which one leads from the former to the latter. In otherwords the garden or 'outdoor room' appears as an integral part of the house. To exit the interior and enter the exterior space ideally on same level, continuity of colour and textures, no steps and an open aspect or view to the garden area. The traditional French-style patio doors opening out to a patio area with panoramic garden views comes to mind! Incorporating planted beds within the patio areas and also against the house walls not only contributes to achieving a seamless transition but also a much more attractive patio area that is more integrated within garden but probably a more cost effective utilisation of available space. What should be avoided at all costs, is where the patio area is simply a buffer zone stretching the width of the site and a simple division between house and garden.

Construction
There is an increasing but vast range of patio materials from which to choose. The unique characteristics and appeal of natural paving stone is very popular, with sandstone, granite, and limestone being the most popular. Colour, size and orientation should also be carefully considered within the overall preferred garden style. For example, warm earthy sandstone tones might appeal or be more compatible with traditional Victorian/Mixed Border style Herbaceous gardens, but the light or neutral tones of granite paving might be stunning in more contemporary or minimalist gardens. The paving patterns can also influence the overall look, small complex patterns might be ideal for 'townhouse gardens' but appear fussy in larger sites. Large rectangular slabs can be laid to emphasise the width or turned around to stretch the length. The slab size must also conform to design style, a traditional layout for a larger area might involve a random joint incorporating 4 or more sizes of paving slab. A contemporary layout might be one size laid in a staggered or 'soldier course'.

Texture
Where possible try and introduce texture, ideally in various forms of the primary material. For example, if you are planning on constructing a patio with sandstone, do consider using sandstone risers for steps but also sandstone setts for lawn edging and sandstone chippings for borders and trims. Not only will this provide interesting textural contrasts but a more coordinated effect. Whereas some might prefer the visual contrast of mixing apples with oranges, I would much prefer a more coherent appearance of one material and use layout to reflect functionality but also visual contrast.

Obstacles
In many cases there is no scope to reposition/remove unsightly utilities such as rainwater downpipes, gulleys, manholes, inspection chambers etc. But the presence of many of these unsightly necessities can be disguised or concealed by design. Recess frames are excellent to conceal covers but provide easy access to waste water, and integrated planted beds can be positioned to conceal pipework etc.

Finally the perfect patio is an integrated space that requires careful and creative planning but must also be well constructed if maximum enjoyment is to be realised.

The author is Director of OWEN CHUBB GARDEN LANDSCAPES LIMITED, an established and award winning garden landscaping company based in Dublin, Ireland. The company offers clients a complete landscaping service including Garden Design, Construction & Planting.

For more information about company and inspiring aspects of landscaping, visit:

http://www.owenchubblandscapers.com

Leaking Skylight Covered

Four Great Home Improvement Projects - Decks, Patios, and More

Expanding your living space by adding exterior structures is not only a smart way to add value to your home, but value to the quality of your outdoor life. There are many types of structures to choose from and virtually something for every type of yard and design aesthetic. Deciding whether to build a deck, patio, sunroom, pergola, covered patio, or screenroom is the first decision the homeowner needs to consider. The benefits of each of these structures are numerous, and any one of these structures will add value to your property.

1. Decks - These relatively uncomplicated structures are one of the most popular exterior additions. Decks can be made of treated lumber or composite decking material, which comes in a wide variety of colors and textures. The addition of a deck, like any other exterior living space structure, alters the exterior of the home and should be carefully planned to incorporate the style of the home. Consideration for the site of the deck should be given to take advantage of all outdoor conditions in order for the homeowner to spend time outdoors in the conditions they prefer.

2. Sunrooms - Another great way to extend living space with year round comfort, sunrooms can include heating and cooling, lighting, ceiling fans, tile flooring, and energy efficient windows. The addition of a customized sunroom adds light, gives the home a more spacious look and adds tremendous value to the home. Sunrooms blend with any style of home while bringing added visual esthetics to both the interior and exterior of the home. Customizing a sunroom to match exterior siding such as Hardie siding is easy and affordable. If an existing sunroom needs replacement windows for more energy efficiency, consider that cost as added overall value to the home.

3. Pergolas - Also referred to as arbors or shade covers, pergolas are a beautiful addition to any home. A pergola can either stand-alone or be attached to an existing structure and can be made of wood or termite resistant metal. Pergolas provide dappled shade and can serve as a trellis for climbing vines. Pergolas can transform a yard and landscape by adding elegant style to the backyard. Freestanding arbors can also play an important part in great garden design and can lead from one garden area to another.

4. Screenrooms - Screenrooms are making a comeback from the first half of the century, when virtually every home had an attached screenroom. They are a great way to add living space to the back or side of your home. Screenrooms allow for enjoyment of the outdoors in shaded comfort while staying free of insects and pests. Screenrooms are simple, economical, and can even be built using an existing patio or deck! Patio covers are another great option for expanding outdoor living space and staying out of direct exposure to the sun.

Home improvements, whether adding a carport, replacement windows for energy efficiency, Hardie plank or siding for a long lasting exterior, or upgrading exterior paint will all add great value to your home. Whether you are adding a carport to protect an extra car or boat or adding outdoor living space by building a deck, sunroom, pergola, arbor, screen room or covered patio, these structures are sure to add to the enjoyment of your home.

Chris Robertson is an author of Majon International, one of the worlds MOST popular internet marketing companies on the web. Learn more about Decks, Patios, and More

Stain On Brick Stairway

Home Window Repair - Home Repairs

One of the most usual repairs that people do around their houses is on their windows. The most common reasons for home window repair are also broken glass and deteriorating putty, which is not only unattractive to the eyes but also produces openings that lets the air escape. Although anyone can always approach a professional to do repairs around the house, there are also certain repairs that can be done by house members and a broken window is one of these. If a family needs to replace the broken glass of a window, then they would just need a number of things to be able to do this.

Anyone can do their own home window repair. Among the things that they just need to get if their window has a broken glass pane are glazier's points, linseed, a glazing compound and of course, a new glass pane. These things can all be found in any hardware store in the neighborhood or just about anywhere. However, to be able to have more choices on window panes, then they should head on to a glass shop. Once, all the materials needed are at hand, anyone can already get started on fixing their broken window.

The first step that needs to be done in home window repair is removing the old broken pane as well as the putty. This is made easier of linseed oil is applied to putty and would be left to stand for some thirty minutes. Heating the putty would also make its removal easier. Once the putty is already malleable, the glazier's points are the next to be removed. However, to get this out, the glass need to be broken completely. As soon as the glass has been taken away and that frame has been cleaned of all remnants of the old putty, boiled linseed oil should also be wiped onto the old wood. This keeps the wood from getting the oil that can be found in the glazing compound.

Laying glazing compound on the window sash on which the new glass pane will be set, is the next step to home window repair. As soon as the glass is set, glazier's points should be placed using a putty knife or a glazing tool at every four inch to keep the glass in its place. The points should be inserted straight and firmly into the wood, against the glass. To seal the pane in, more glazing compound should be applied. It should be made sure that half of the glazing is set on the glass while the other half should be in the frame. After a few days, these new window can already be painted. However, you should also paint the edge of the glass right before the frame to seal in the glazing.

Katie Appleby is an accomplished niche website developer and author. To learn more about home window repair, please visit The Home Carpenter for current articles and discussions.

Are Home Remodeling Costs Down

Lately we've been inundated by doom-and-gloom news in the media about the real estate market. But if you're planning to stay in your home and remodel or upgrade a rental for future resale, there is actually some good news to report: it's becoming less expensive to remodel as the market slows down and the law of supply and demand kicks in.

A year or so ago, the market was on fire and building materials and labor were scarce and expensive since the demand for both was equally hot. Construction material was in short supply, if you could find it at all, and finding skilled craftsmen for your project was an exercise in frustration. That situation was made even more difficult by the demand for rebuilding areas of the country that had been hit by Hurricane Katrina. On top of that, delivery costs also rose, due to a spike in gas prices. All of those factors contributed to cost increases of as much as 50 percent in certain areas.

The good news about all that? With the slow-down in the real estate market, materials are more readily available and construction people are actually looking for work to fill their schedules. Gas prices came down briefly, though they've begun to rise again, but the other pressures have lessened, which means that the cost of many common remodeling projects has decreased by 20% or more.

That's especially good news if your project is relatively small. During the height of the real estate boom, many contractors turned down smaller projects or told home owners to wait until they could get to them. However, many contractors are now actively trying to drum up work as the market continues to soften.

The downside of remodeling with an eye toward increasing your property's value is that, at least for the near term, your upgrade probably won't immediately pay for itself like it would have in the last few years. Since real estate prices have declined significantly in many parts of America, your remodeling project won't do much from an investment standpoint as it used to. Recent surveys have suggested that even the most popular upgrades, bathroom and kitchen remodels, are only returning about 80% of their cost.

The bottom line: this may be a good time to schedule that major remodeling project you've been wanting, assuming you're not doing it to quickly turn around and use the upgrade to increase your profits. If you do want to sell for top dollar in a buyer's market, you can increase your profits by turning your home into a buyer's dream home using less expensive faux paint techniques.

Whether you want to remodel or just decorate your home, you can benefit from exploring Flip That House with FAUX. See the controversial home that was on Flip That House at http://flipthathousewithfaux.com/book.html Enjoy your home!

Copyright 2007 Jeanette Fisher

Thursday, April 2, 2009

How to Build a Room in Your Garden - Home Tips

Need extra living space but don't want to move? Building a room in the garden is a clever and cost-effective solution. Creating a separate room in the garden gives you a great getaway for work, hobbies, or just some piece and quiet.

'A garden room adds appeal to a house, making it attractive to all types of buyer, and a real draw for families,' says James Redington from Foxtons.

What are my choices?

The simplest cabin or summer house is similar to a shed, with either shiplap walls and cedar roof shingles or a log-cabin construction. These are usually supplied in pre-fabricated panels and, if you're a skilled DIYer, you could put one up yourself. More advanced ones, with sliding glass doors or a deck, for example, will need to be built on site by a specialist. Once the concrete base or piles are in, installation can take from one day to two weeks.

Limitations and security

Avoid positioning the garden room near growing trees, and ensure there's access for maintenance. You'll also need to think about access for delivery, though panels could be carried through the house.

As for securing your garden room, it's best to fit locks on doors and choose toughened glass. Check that the locks comply with your home insurance requirements. It's worth considering external lights, a burglar alarm and Venetian blinds to prevent anyone seeing in.

Can I use it all year round

If you insulate well and fit double-glazed windows, you'll be fine for the colder months. An electrician can run a cable from your house to the room to power lights and heating. In some cases, downlighters, sockets and wiring may be pre-installed in the panel walls.

How to use your garden room

Plan your room to ensure it's fit for purpose.

Home office Companies such as Henley will kit out your office with fitted furniture.

Gym Equipment can be bulky, so you'll need a large room. It's also an investment, so ensure your security is up to scratch.

Games room

You'll need plenty of space to play table games - L247cm x W153cm for a table tennis table, for example.

Music room

Use a company that specialises in sound-proofing.

What permission do I need and how much will it cost?

If your building is away from the house, takes up less than 50% of the garden and is smaller than 15sq m, or in some cases 30sq m, you're unlikely to need planning permission or Building Regulations Approval. However, there are exceptions - such as if you intend to use the room for sleeping - so check online at planningportal.gov.uk, and consult your local council's planning department.

Prices start from 439 for a Buckingham summerhouse (H213cm x W198cm x D205cm) from B&Q to around 22,600 for a bespoke design from Inside Out.

You can find more information on interior design ideas at house to home, helping you create a look you'll love.

What is Injection Waterproofing?

Injection waterproofing is often used to fill and seal cracks and crevices. The material is most often made from a polyurethane compound. The compound is lightweight and expands up to twice its original size when applied to a surface. Many non-toxic and environmentally safe products are available at home improvement stores nationwide. Injection waterproofing is used mainly in foundation crack repairs.

In most foundation cracks, a polyurethane injection can seal the opening. In some smaller cracks it may be apparent that a sealant was used because it may be difficult to evenly inject the compound. Single caulking style cartridges and the dual side-by-side cartridge systems are the types of injection waterproofing compounds available for retail purchase. Both of these are manually injected and easy to pump.

When using an injection waterproofing method, it is important to keep the area dry. Temporarily block any flowing water to the area, and clean and dry the area as needed. Experts say that in the case of water flowing through a hole, you can temporarily caulk the hole with candle wax, modeling clay or plumbers putty. If the cracks are in narrow or hard-to-reach places, you can use a flexible hose attached to the injector nozzle.

Whatever waterproofing system your leakage problem requires, be sure to do your research. If you choose to make this a do-it-yourself project, make sure you know where your leaks are coming from and the proper method to repair them. When purchasing waterproofing materials you should make sure you are buying the appropriate product for your needs. The National Association of Waterproofing and Structural Repair Contractors (NAWSRC) has tons of information on waterproofing. Whether or not you decide to hire a contractor, this organization can help you from beginning to end.

Waterproofing Info provides detailed information on waterproofing systems, including injection waterproofing, foundation waterproofing, concrete waterproofing, deck waterproofing, basement waterproofing, and waterproofing basement walls, as well as waterproofing contractors and consultants. Waterproofing Info is affiliated with Business Plans by Growthink.

Wednesday, April 1, 2009

Planning Guide to Building a Sunroom

A homeowners planning guide to building a Sunroom

Size: Is a very important part of your Sunroom planning process. Build a room that is too big and you spent more money than you need too. Build a room that is too small and you regret it for years to come. Most homeowners have a very difficult time trying to decide what is the right size room for them. If you try to figure a size looking at things from your yard or by just putting it on your existing deck the size could be all wrong for the planned function of the room. The best way to size a room is to pick a room in your home that is comfortable and put a tape measure on it and voila you have the size room that will fit your needs.

Height: How tall should my room be? Typically the higher the ceiling is in a Sunroom the better. The Sunroom feels more open; the trapezoid glass on the sides or the front is bigger with a very dramatic look inside as well as aesthetically pleasing from the outside. You also have the ability to hang a ceiling fan as some states have minimum height requirements. If your current conditions look like they don't allow for a high ceiling ask your Sunroom contractor about adding a cricket to your existing roof to provide additional height.

Style roof: There are two basic roof styles that are available, a cathedral roof Marquee or shed roof. Note that with the cathedral roof the trapezoid glass is on the front wall of the sunroom and with the Marquee the trapezoid glass is on both of the projection walls.

Type of Glass: How many days of the year you plan on using your Sunroom will play a significant role in your glass selection. If you live in an area of the country that has a cold winter climate you should at the very minimum have a double pane window with Low -E and argon gas. Typically a window of this type will have an R-value of about 4. If your looking for a very easy to heat year round room you should consider a triple pane window with double Low E with krypton gas. Typically a window of this type will have an R-value of about 9. Remember unlike your home which is about 85% walls and 15% windows a Sunroom is about 85% windows and 15% walls, glass selection plays a very important roll as to how comfortable your Sunroom will be. If you live in the south where the heat of the sun can make a room uncomfortable look for a window that has Solar Heat Gain Coefficient (SGHC) of less than 0.55. For the sake of your furniture, flooring and window treatments make sure your windows block at least 75% of the UV rays that are transmitted from the sun, there are windows available that block as much as 95%.

Sunrooms in General: There are numerous options and upgrades available and will vary based on the manufacturer. In your planning process make sure you are aware of all of the options that are available from the companies that you will be getting estimates from. Some companies will only offer sliding windows while another will offer every type of window made. Are you going to shingle the roof to match your home? If you do not it will be a white aluminum roof. (Not very attractive) Make sure that option is available; there are some companies that will not offer that.

What about electric? If your Sunroom is off the ground and there is access from underneath you can wire the room from underneath using surface mounted plugs.
If there is not enough room then be sure you order an electric ready room with electric mullions and conduits. The disadvantage of the mullions is they take up glass space.

Another consideration is what to do with your house wall; you certainly don't want to sit in your beautiful new Sunroom and look back at the siding on your house. Your Sunroom contractor can remove the siding and sheetrock or pine board it, something to give it a finished look.

Lastly you should check out the contractor or Sunroom Company on the BBB as well as getting a referral list to call previous customers. Then check the warranty that comes with the Sunroom, what it covers, for how long and is it prorated. Your best bet is a non-prorated warranty

About the author: Thomas Bloch is part owner of Morgan Exteriors LLC and has been involved in designing well over a thousand Sunrooms. If you have a question or comment you can visit their website at http://www.morganexteriorsnh.com

Building Projects With Treated Wood - Home Remodeling Ideas

Building with treated wood and the idea that this project will last forever because of the wood you used is not necessarily true. Over the years I have seen contractors and homeowners use treated wood for projects like building decks with this idea in mind.

I just met with a homeowner that was asking me about vinyl fencing. The homeowner approached me with some facts about vinyl fencing. She started to explain to me how long a vinyl fence would last verses a wood fence. I reminded her that the vinyl posts usually slip over metal or wood building materials.

She proceeded to inform me that treated wood will last a lot longer than wood used when building a wooden fence. It took me a while to change her mind and reprogram her with a few picture this from my website. I know this is hard to imagine but wood rots and steel rust.

All you end up with is a vinyl fence that is in pretty good shape if taken care of properly laying down in your yard with broken or rusted fence posts.

Do you know that some people use treated wood for countertops and food preparation areas when building certain projects like an outdoor barbecue? Do you know people build outdoor furniture with treated wood and then sit in it with a chance of toxic chemicals entering into your body? This is where Redwood comes in as a natural building product or other nice looking woods. Redwood is classified as a softwood and if used for a countertop and a barbecue kitchen area you will have to protect it from heavy pans and people using the countertop for a cutting board.

Do not use treated wood for a projects that will be used for food preparation later.

It's a good idea to wash your hands after handling treated lumber. It's a really good idea to wash your hands after using treated lumber if you are going to eat something or make something for another person or yourself.

For all the homeowners and building contractors that use treated wood and bury it in dirt. Or build a low lying deck right above the ground I would like to share something with you. I have been repairing and replacing your work for over 30 years now. You guys keep me busy and I want to thank you for all the years you guys have been in business.

I still can't believe the amount of work I see being done using treated wood with the illusion that it will last longer than regular construction standard wood. I don't know how else to put it except to say treated wood will rot fast in the right conditions.

Treated wood does need to be protected from rain, snow, heat and other elements of the weather. It cannot sit in the dirt or lay in water for long periods of time without slowly disintegrating. Oh yeah one more thing termites will eat sections of the wood that is not completely treated.

Use treated wood properly when building and inform other people about some of the stuff you learned in this article. Reread this article later and save it for the future.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on building and remodeling your homes and Vista Structural Home Repairs

Color Coat Around Window